How to Get Keys Out of a Locked Car

It can be quite frustrating to lose your keys in your car. It can be a pain to call a locksmith or AAA roadside assistance but there are simple ways you can remove your keys yourself.

A clothes hanger and pliers are a popular method to unlock doors. The hanger for clothes will have straight sides, with a hook at the other end. This hook is what you use to lift the control rod within the door.

1. Push the Unlock Button

If you're locked out of your car, it can be a frightening and stressful situation. If you've locked yourself out of the trunk or the door, there are many ways to unlock your keys.

Pressing the Unlock Button is the first choice. Typically, this button is in the center console. However, it could be located on the outside of the door or on the key fob.

Depending on the location of the Unlock Button is situated, you might be able to use a wire coat hanger or screwdriver to push it. Make sure that the tools you use are thin enough to bend according to your vehicle's Unlock Button.

This method works for both old and new cars, as per Bill Evans, manager of J&E Auto Body in Clark, New Jersey. He says Triple A drivers and tow truck operators use this method.

Another option is using either a wedge or a stopper for the door. This tool is made up of an inflatable or curly wedge that can be used to make space in the door for you to push the Unlock Button.

You can also try using a long rod such as a coat hanger. This technique is similar to the wedge and door stop methods, however you'll need to insert the rod in the opening you've made in the door.

Although this trick can take a while but it's an excellent way to gain your keys out of the car that is locked. If you're unable to do it, you can call a professional locksmith for assistance.

2. Shimmy the Lock

It can feel like you're experiencing an anxiety attack when your keys are locked in your car. However, there are few methods you can employ to remove your keys from the car without breaking any sweat.

In the beginning, you can move the lock around to try to find some space. This is applicable to locks that are slid up, as well as any unlocking mechanism that is triggered by a stick or rod or access tool.

For this method to work you'll need a piece of string or a wire hanger with at least half the width of the opening in the door. These are usually found in big-box stores selling general products, auto parts stores, and home improvement stores.

Another method of shimmying your lock is to tie a slipknot at the end of a shoelace. Then, you can place it between the frame of your car Lockout service and the door. Then, Car Lockout service move the slipknot's edges around until you reach the post of your lock. Then, wrap the knot around the lock.

It could take a while to create the loop around the post but once it is tightened enough to unlock the lock, it should be easy to unlock. Be careful not to push the slipknot too much or you may damage the lock or bend the post.

You can also utilize a strap made of plastic to shimmy the lock if you have a vertical lock. This method is similar to the first, but requires patience. First, you must move the strap between the door frame and the lock post until the strap can be fitted into the gap.

For more difficult doors you can swing the lock with an inflatable wedge, an item found in many emergency kits that will force the door open. This technique is a bit complicated and could cause damage to your vehicle therefore it is best to do only if you have the appropriate tools and are competent to maneuver the wedge into position.

3. Pull the lever on the interior door.

There are many ways to unlock your car from within. But the best method is dependent on your specific situation and the kind of lock you have on your vehicle.

One method that is popular is using a modified wire coat hanger (also known as a slim jim). This works with manual locks, but isn't recommended for automatic locks.

Once the hanger is bent to the correct length, pull on the hook until it's pointed toward you. This will allow the control arm to be secured within the door.

The next step is to slide the hanger between the window and the weather stripping. The hook must fit into the hole of the control arm when it is within 3 cm of where the window's meet.

This is the most difficult step in this procedure, and it could take several attempts to get the hanger to be hooked to the locking pin on the door. Once it's hooked then pulled, the hanger should be up and your door should open.

You can also use a bobbypin, or another tool to put a lasso on your locking pin and pull it upwards. It's not an easy task and may require some trial and error.

A last option is to use the rod made of metal with some slight bend at its halfway point. This requires an extended reach tool. If you don't have one, you can use a thin rod or a large coat hooker.

If you're still having issues then it's perhaps time to call an experienced locksmith. Before calling a professional locksmith, be sure to look at the following options.

4. Hook the Keys

Being locked out of your car could be an extremely stressful and nerve-wracking experience. There are a variety of ways to gain access to keys in your car.

One of the most commonly used methods is to make use of a modified wire coat hanger or a slim jim. This method is best suited for manual locking doors (older cars), and it's an easy way to unlock the door without calling a locksmith.

First, untwist the hanger and make it into an angular hook. Then, slide it between the window glass and the weather stripping until the hanger is within 3 centimeters from the car door and window.

Once the hanger is in that position, turn it to face the side of the door. Then, look around for the control arm that connects to the lock rod. Once you have found it, pull up to unlock the door.

A shoelace or similar item with loops at the end is a great way to connect the keys. This is especially useful for post locks which can be fixed straight to the window sill in the car.

If your shoelace is too long to reach the post, tie a slip knot into it and place it between the door of your car and the frame, approximately 5 inches from the middle. To move the lace down towards the post, gently wiggle it in a back and forth motion. The lock will then be opened by jiggling it up. This might require a bit of trial and trial and worth it! If you're struggling in your efforts, it's time to seek out professional help.

5. Press the Trunk Release Button

Pushing the Trunk Release Button is among the easiest ways you can get your keys out of a car that is locked. Often the buttons are located near the driver seat or on the passenger side of the car. However, not all vehicles come with these buttons, so it may be important to contact a locksmith in the event that you're unable to find one.

First, make sure your car lockout price doesn't have an electronic lock that can be accessed via a touch. This means that someone can simply walk up to the vehicle and touch the trunk and door locks using their key fob to open it.

Next, make sure the cylinder lock is removed from the door. This is accomplished by taking the key cylinder out of the door. It requires a bit of patience and work.

The key cylinder will usually be fixed to the interior of the door. It's difficult to remove without damaging. To take it off, you'll need a Torx screwdriver.

The next step is to find a way to put the cylinder back into the door. This can be a little tricky, but with some patience and assistance from your companions, you'll soon be able to put it back in place.

The next step is to utilize a wire hanger in order to look around until you find the lever that opens the trunk. Next, insert the wire hanger between the trunk and the backseat. Once you feel resistance, you can open your trunk. This is the most efficient method to get your keys out of the trunk that is locked, however it is still recommended to contact locksmiths in the event that you have a problem.